Dual Fuel Range Cooker With 13amp Plug
Are you a cook at home who loves the responsive heating control of gas cooktops, but requires an electric oven for baking? Discover a dual fuel range cooker that offers the best of both worlds.
Many experienced home chefs favor gas cooktops due to their superior temperature control and capacity to use sophisticated cooking techniques, such as grilling. These stoves are costly though, especially in the event that you require an additional gas connection and electrician to install it.
What is a 13amp outlet?
If you have a dual-fuel range cooker (also called a gas and electric oven), you will need a 13 amp plug. The plug will also have to be wired in the cooker ring circuit by a fully competent electrician.
This assures that the current that flows through the plug is secure and not too high, which could create an electrical fire hazard. The plug has a fuse that controls the current. The fuse will blow as soon as it is deemed to be overloaded. This safeguards the appliance against an overload of electricity.
The fuse is rated 13 amps, which is shown on top of the plug. This is the maximum amount of current that the plug can pass without damaging the appliance or causing heat to the socket. It is important that when replacing fuses, you always use the same amps as the original. If you replace the fuse with one of a different rating, then you are at risk of overheating the socket, and potentially placing yourself and others at serious risk.
A 13 amp fuse will be a ceramic type, which is very durable and can withstand the high temperatures generated by the range cooker. Ceramic elements are also fire-resistant and therefore a better choice than other kinds.
There are several ways to install the 13 amp plug. The plug can be connected to a live socket with screws or a plastic jaw cord clamp. The plug should be put in place with a firm push and then tightened, making sure that the cord clamp is secure.
Some plugs will have a diagram of wiring on cardboard over the pins and these must be removed prior to connecting the wires. The wires need to be cut to the correct length, because if they are too long, they can get crushed when the plug covers are replaced. The earth wire should be the longest in order to connect it before the neutral and line pins.
How do I install an outlet with 13amps?
The vast majority of dual fuel range cookers sold in the UK are wired to 13 amp plug sockets and this is vital as ovens can draw a substantial amount of current and standard plug sockets are only designed to handle 10 amps.
Generally speaking, new appliances must be equipped with plugs at the time of purchase and it is part of ensuring compliance with the Plugs and Sockets etc (Safety) Regulations 1994. Older appliances might not have a plug installed and this is the reason for the problem.
best value dual fuel range cooker to consider when connecting a cooktop to an existing plug socket is to make sure that the fuse rating of the fuse box matches the rating of the plug. This is crucial because an incorrectly-sized fuse can be dangerous.
It is also recommended to make sure that the fuse is fully installed within the cartridge and that there isn't any excessive movement within it. The next step is to prepare the flex to be used. Remove the sheathing to reveal the three conductors insulated. Utilize a utility knife to cut the sheathing just beyond the grip on the cord at the point of entry into the plug. The blade will not cut through the conductors that are insulated. The nick should be large enough to allow for the cable and sheathing to separate as the sheathing is pulled back. Cut off the excess sheathing leaving a little more than 40mm over the flex.
The flex is placed over the plug with the earth terminal on the top and the live and neutral terminals at the bottom. The sheathing on each pin is removed using the colored conductors as a reference. The internal cable is then inserted to the terminal with the help of the cord grip. If the plug has a cord clamp that is screw-type, let it loosen and then pull the insulation back to reveal the copper wires. Connect each wire insulated to the correct terminal using the plug's channel. Start with the earth conductor first, then the neutral and finally, the live.
What is the maximum draw of a 13 amp plug?
The maximum power draw of the 13amp plug is 3kw at 230 volts. This is a lot of power, but the standard fuse in a UK plugtop will not fail until the cable has reached to a dangerous level. A defective plug or socket could cause a fire so it's important to be aware of the amount of power you use, especially in the kitchen.
The ceramic fuses that are used in plugtops weigh around 25mm in diameter and are designed for 240V mains. The fuses will have an BS Kitemark or a similar mark on their side, and they will contain sand. Plastic or glass alternatives are available, but should never be used in conjunction with a live plug.
In the UK the majority of dual fuel range cookers are hardwired. They are not able to be plugged directly into a wall outlet. They are usually connected via a dedicated cooker circuit, which is suitable only for appliances with a maximum of 20 amps.
Check the ring circuit of your home by using the fuse box, or call a local electrician. You can ask them if the sockets are on the same ring or if they are separate. They should also be able tell you if there is an individual circuit that powers your oven.
If you're in the market for a new dual-fuel range cooker the size of your kitchen is a crucial factor to take into account. We have a wide selection of cookers to suit any space, including small 50-60cm dual fuel models as well as huge 90cm + double oven models from the top brands such as Rangemaster and StovesAreUs.
If you're looking for something different Don't worry, we also offer a fantastic range of gas and electric multi-function cookers. These multi-functional appliances let you cook a variety of meals, including curries, pasta, and casseroles!
Explore our entire range of Cookers in Currys online or visit us in-store to browse. We offer free delivery and home installation on selected range cookers, and also flexible payment options. If you have any questions, our team are on hand to help by sending us an email or give us a call. Credit is subject to status and terms & conditions apply.
What is the maximum current draw of the cooker switch?
There is a lot confusion about the maximum current draw of a cooker switch. Most cookers are hard-wired, and connected to a specific oven-ring circuit, not the standard socket. This is due to the fact that they usually consume more than 20 amps when the gas hob and electric oven are in use.
Therefore, you will not find a dual fuel range cooker that could be fitted to a standard socket as it could pose a significant fire risk and be in violation of electrical regulations. A licensed electrician must always install new electrical circuits in the kitchen to the cooker. They will also make sure that the total load of the oven and hob do not exceed the circuit's capacity.
Dual fuel range cookers combine the flexibility of a gas stove and the precision and precision of an electric oven. This is why they're popular among cooks and chefs alike. Dual fuel range cookers are perfect for trying out different cooking techniques, including searing or grilling.
When purchasing a new range cooktop, you need to consider several factors such as size, function, and price. In addition, you will be required to ensure that your house has an appropriate gas hook-up to the appliance. If you're not sure then it's advisable to get a Gas Safe engineer inspect your property prior to installation.
Currys dual fuel range cookers come with a variety of models to suit all budgets. From affordable models by Indesit and Zanussi, to our own Essentials collection. If you're looking for something more sophisticated we have a selection of premium JennAir models, that come with many innovative features.
When purchasing a new dual fuel range cooker, it's important to check the owner's manual for specific information regarding the electrical and gas requirements. You will need an electric connection to your home. A plumber could be required to set it up for you. You might also require a dedicated cooker-ring circuit, installed by a qualified electrical engineer.